Release Agent Solutions for Automotive PU Interior Parts
An overview of four key demolding challenges in automotive PU interior parts and the specialized release agent solutions to address them.
Similar Products
Product Category
Water Based Precast Concrete Release Agent for Pipe Pile Applications
Water-based release agent optimized for pipe pile and related precast applications. Supports smooth release and more consistent surface quality under repetitive cycles.
Product buying path
Choosing release agent for concrete pipe pile production
Use this path when the buyer needs stable demolding for pipe pile molds while controlling residue, surface marks, and repeated mold cleaning.
Best fit
- Concrete pipe pile and cylindrical precast component production
- Plants with repeated stripping, surface-mark, or mold-cleaning problems
- Buyers comparing water-based release agents for high-repeat precast lines
Before you request a sample
- Confirm pipe pile mold material, rotation or forming process, curing condition, and cycle frequency.
- Record where defects appear: ends, inner surface, outer surface, seams, or high-friction zones.
- Check whether over-application is causing residue, staining, or surface marks.
- Run the sample on a controlled mold section before changing the full pipe pile line.
Advantages of this Solvent Based Concrete Stripper
Eliminates air bubbles and surface defects, Improving finished product quality. Prevents color variation, This non-staining release agent ensures consistent appearance. Maintains a smooth finish, Achieving an exposed concrete effect. Dilutable with water, As a liquid release agent, each kilogram covers up to 20 m², reducing usage and lowering production costs. Protects molds, This anti-corrosion release agent prevents rust and extends mold service life. Reduces defect rate, Saving material costs and delivering high cost-performance. Eco-friendly and biodegradable, VOC-free, Meeting green production standards. Reduces mold cleaning time, Reducing cleaning costs. Fast drying speed, Increasing production efficiency.
Product Parameters
Model
GP-4,PC-06,GZ-06
Origin
China
Applications
Pipe pile molds, cylindrical precast parts, and high-frequency demolding lines.
Properties
Uniform coating behavior, low residue tendency, and reliable release performance.
PH
6-8
Dilution Ratio
3-35 times
Flash Point
> 93°C
Freezing Point
-7℃
Use Temperature
Normal Temperature
Package
50kg/barrel,200kg/barrel
Storage
Store in a cool, dry place indoors
Transportation
7-20 days
Shelf Life
12 months
How to Use
- 1
Clean The Mold : Remove any concrete residue from the mold surface. - 2
Dilute The Release Agent : Mix with clean water at a 3–20 times dilution ratio. - 3
Apply To Mold : Use a roller or spray to coat the mold evenly. - 4
Pour Concrete : Allow to dry before pouring concrete.
Certificate
SGS certified water-based release agent
