Release Agent Solutions for Automotive PU Interior Parts
An overview of four key demolding challenges in automotive PU interior parts and the specialized release agent solutions to address them.
Similar Products
Product Category
EVA Release Agent
Water-based release agent for EVA molding operations. Supports clean separation, lower defect rates, and smoother finished surfaces in repeated production.
Advantages of this Solvent Based Concrete Stripper
Maintain Glossy Surface, As a Non-Staining Release Agent, it leaves no residue and ensures flawless product surfaces. Reduce Product Defects, Advanced emulsification technology enables smooth demolding, reducing pinholes, bubbles, tearing, and surface irregularities. Minimize Residue, Reduces carbon buildup on molds during vulcanization, lowers cleaning frequency by 40%–80%, shortens downtime, and boosts production efficiency. High-Temperature Resistance & Plasticizer Migration Prevention, Effectively prevents plasticizers from migrating onto molds at high temperatures, keeping mold surfaces clean. Versatile Applications, Suitable for PVC soft and hard molding, PE injection or blow molding, and EVA foaming processes. Mold Protection, As an Anti-Corrosion Release Agent, it prevents rust and extends mold life. Eco-Friendly & Safe, This Eco-Friendly Release Agent is VOC-free, odorless, and complies with green production standards. Fast Drying, Dries in as little as 3 minutes, significantly improving production efficiency. High Cost-Performance, Dilutable with water to form a Emulsion Release Agent, with a dilution ratio of 5–35 times. Each kilogram can cover up to 20 m², making it a highly cost-effective release agent.
Product Parameters
Model
JA-8100
Origin
Applications
EVA molded components, footwear parts, and lightweight foam product lines.
Properties
High dilution flexibility, uniform spread, and stable demolding behavior.
PH
6-8
Dilution Ratio
5-35 times
Flash Point
＜93℃
Freezing Point
-7℃
Use Temperature
70-250℃
Package
50kg/barrel,200kg/barrel
Storage
In a cool, dry place indoors
Transportation
7-20 days
Shelf Life
12 months
How to Use
- 1
Clean the Mold : Clean the mold surface and wipe it with a clean cotton cloth. - 2
Apply the Mold Release Agent : Spray or brush the mold release agent evenly over the entire mold surface. - 3
Hot Press the Model: : Wait for a complete film of the mold release agent to form on the mold surface, then begin hot pressing the model.
Certificate
SGS certified water-based release agent
